Fungicides - Fungicides and algal killing agents are widely used water treatment agents in production and daily life, and their performance is recognized by consumers. However, you may not be aware of the ways in which fungicides and algal killing agents are administered. The following is a summary:

1. We can dilute the medicine with water first, and pay attention to the temperature of the water. Generally, it should be placed in front of the disinfectant that cannot exceed 70 degrees at 60 degrees,?? Otherwise, it will affect the activity of the biocide, and it can be used during filtration operation. You can add points to a class that point to the service;

2. Use a measuring funnel for delivery: This is a more direct method that is relatively simple. We can put an appropriate amount of bactericidal and algal agents into the funnel, and according to the rate at which the drugs can be directly supplied to the boiler;

3. If there is no economizer for algae removal, how can we directly deliver drugs to the boiling tank in the tank, and the drugs can be directly related to the sterilization effect of the water supply system towards the furnace;

4. Regular delivery, with a sewage treatment rate of around 7% for this method, but it is necessary to ensure that each class has a discharge, and the time should be controlled at around 50 seconds. If there is no change after sewage treatment, attention should be paid to the time control of the water level, and you need to check if the line is blocked.